从零开始的Spring Security Oauth2(二)

DD的博客全面升级,阅读体验更佳(尤其是系列教程),后续不再通过这里发布新文章,而是改到 www.didispace.com 发布啦,奔走相告!点击直达~

本文开始从源码的层面,讲解一些spring Security Oauth2的认证流程。本文较长,适合在空余时间段观看。且涉及了较多的源码,非关键性代码以…代替。

获取token

上一篇博客中我们尝试使用了password模式和client模式,有一个比较关键的endpoint:/oauth/token。从这个入口开始分析,spring security oauth2内部是如何生成token的。

首先开启debug信息:

logging:
level:
org.springframework: DEBUG

可以完整的看到内部的运转流程。

client模式稍微简单一些,使用client模式获取token
http://localhost:8080/oauth/token? client_id=client_1&client_secret=123456&scope=select&grant_type=client_credentials

由于debug信息太多了,我简单按照顺序列了一下关键的几个类:

ClientCredentialsTokenEndpointFilter
DaoAuthenticationProvider
TokenEndpoint
TokenGranter

ClientCredentialsTokenEndpointFilter和DaoAuthenticationProvider

截取关键的代码,可以分析出大概的流程
在请求到达/oauth/token之前经过了ClientCredentialsTokenEndpointFilter这个过滤器,关键方法如下

public Authentication attemptAuthentication(HttpServletRequest request, HttpServletResponse response)
throws AuthenticationException, IOException, ServletException {
...
String clientId = request.getParameter("client_id");
String clientSecret = request.getParameter("client_secret");

...
clientId = clientId.trim();
UsernamePasswordAuthenticationToken authRequest = new UsernamePasswordAuthenticationToken(clientId,
clientSecret);

return this.getAuthenticationManager().authenticate(authRequest);

}

用来从请求中获取client_id,client_secret,组装成一个UsernamePasswordAuthenticationToken作为身份标识,使用容器中的顶级身份管理器AuthenticationManager去进行身份认证(AuthenticationManager的实现类一般是ProviderManager。而ProviderManager内部维护了一个List,真正的身份认证是由一系列AuthenticationProvider去完成。而AuthenticationProvider的常用实现类则是DaoAuthenticationProvider,DaoAuthenticationProvider内部又聚合了一个UserDetailsService接口,UserDetailsService才是获取用户详细信息的最终接口,而我们上一篇文章中在内存中配置用户,就是使用了UserDetailsService的一个实现类InMemoryUserDetailsManager)。UML类图可以大概理解下这些类的关系,省略了授权部分。

图1 认证相关UML类图

可能机智的读者会发现一个问题,我前面一片文章已经提到了client模式是不存在“用户”的概念的,那么这里的身份认证是在认证什么呢?debug可以发现UserDetailsService的实现被适配成了ClientDetailsUserDetailsService,这个设计是将client客户端的信息(client_id,client_secret)适配成用户的信息(username,password),这样我们的认证流程就不需要修改了。

经过ClientCredentialsTokenEndpointFilter之后,身份信息已经得到了AuthenticationManager的验证。接着便到达了
TokenEndpoint。

TokenEndpoint

前面的两个ClientCredentialsTokenEndpointFilter和DaoAuthenticationProvider可以理解为一些前置校验,和身份封装,而这个类一看名字就知道和我们的token是密切相关的。

@FrameworkEndpoint
public class TokenEndpoint extends AbstractEndpoint {

@RequestMapping(value = "/oauth/token", method=RequestMethod.POST)
public ResponseEntity<OAuth2AccessToken> postAccessToken(Principal principal, @RequestParam
Map<String, String> parameters) throws HttpRequestMethodNotSupportedException {
...
String clientId = getClientId(principal);
ClientDetails authenticatedClient = getClientDetailsService().loadClientByClientId(clientId);
...
TokenRequest tokenRequest = getOAuth2RequestFactory().createTokenRequest(parameters, authenticatedClient);
...
OAuth2AccessToken token = getTokenGranter().grant(tokenRequest.getGrantType(), tokenRequest);
...
return getResponse(token);

}

private TokenGranter tokenGranter;

}

省略了一些校验代码之后,真正的/oauth/token端点暴露在了我们眼前,其中方法参数中的Principal经过之前的过滤器,已经被填充了相关的信息,而方法的内部则是依赖了一个TokenGranter 来颁发token。其中OAuth2AccessToken的实现类DefaultOAuth2AccessToken就是最终在控制台得到的token序列化之前的原始类:

public class DefaultOAuth2AccessToken implements Serializable, OAuth2AccessToken {

private static final long serialVersionUID = 914967629530462926L;

private String value;

private Date expiration;

private String tokenType = BEARER_TYPE.toLowerCase();

private OAuth2RefreshToken refreshToken;

private Set<String> scope;

private Map<String, Object> additionalInformation = Collections.emptyMap();

//getter,setter
}


@org.codehaus.jackson.map.annotate.JsonSerialize(using = OAuth2AccessTokenJackson1Serializer.class)
@org.codehaus.jackson.map.annotate.JsonDeserialize(using = OAuth2AccessTokenJackson1Deserializer.class)
@com.fasterxml.jackson.databind.annotation.JsonSerialize(using = OAuth2AccessTokenJackson2Serializer.class)
@com.fasterxml.jackson.databind.annotation.JsonDeserialize(using = OAuth2AccessTokenJackson2Deserializer.class)

public interface OAuth2AccessToken {

public static String BEARER_TYPE = "Bearer";

public static String OAUTH2_TYPE = "OAuth2";

/**
* The access token issued by the authorization server. This value is REQUIRED.
*/
public static String ACCESS_TOKEN = "access_token";

/**
* The type of the token issued as described in <a
* href="http://tools.ietf.org/html/draft-ietf-oauth-v2-22#section-7.1">Section 7.1</a>. Value is case insensitive.
* This value is REQUIRED.
*/
public static String TOKEN_TYPE = "token_type";

/**
* The lifetime in seconds of the access token. For example, the value "3600" denotes that the access token will
* expire in one hour from the time the response was generated. This value is OPTIONAL.
*/
public static String EXPIRES_IN = "expires_in";

/**
* The refresh token which can be used to obtain new access tokens using the same authorization grant as described
* in <a href="http://tools.ietf.org/html/draft-ietf-oauth-v2-22#section-6">Section 6</a>. This value is OPTIONAL.
*/
public static String REFRESH_TOKEN = "refresh_token";

/**
* The scope of the access token as described by <a
* href="http://tools.ietf.org/html/draft-ietf-oauth-v2-22#section-3.3">Section 3.3</a>
*/
public static String SCOPE = "scope";

...
}

一个典型的样例token响应,如下所示,就是上述类序列化后的结果:

{ 
"access_token":"950a7cc9-5a8a-42c9-a693-40e817b1a4b0",
"token_type":"bearer",
"refresh_token":"773a0fcd-6023-45f8-8848-e141296cb3cb",
"expires_in":27036,
"scope":"select"
}

TokenGranter

先从UML类图对TokenGranter接口的设计有一个宏观的认识

图2 TokenGranter相关UML类图

TokenGranter的设计思路是使用CompositeTokenGranter管理一个List列表,每一种grantType对应一个具体的真正授权者,在debug过程中可以发现CompositeTokenGranter 内部就是在循环调用五种TokenGranter实现类的grant方法,而granter内部则是通过grantType来区分是否是各自的授权类型。

public class CompositeTokenGranter implements TokenGranter {

private final List<TokenGranter> tokenGranters;

public CompositeTokenGranter(List<TokenGranter> tokenGranters) {
this.tokenGranters = new ArrayList<TokenGranter>(tokenGranters);
}

public OAuth2AccessToken grant(String grantType, TokenRequest tokenRequest) {
for (TokenGranter granter : tokenGranters) {
OAuth2AccessToken grant = granter.grant(grantType, tokenRequest);
if (grant!=null) {
return grant;
}
}
return null;
}
}

五种类型分别是:

  • ResourceOwnerPasswordTokenGranter ==> password密码模式
  • AuthorizationCodeTokenGranter ==> authorization_code授权码模式
  • ClientCredentialsTokenGranter ==> client_credentials客户端模式
  • ImplicitTokenGranter ==> implicit简化模式
  • RefreshTokenGranter ==>refresh_token 刷新token专用

以客户端模式为例,思考如何产生token的,则需要继续研究5种授权者的抽象类:AbstractTokenGranter

public abstract class AbstractTokenGranter implements TokenGranter {

protected final Log logger = LogFactory.getLog(getClass());

//与token相关的service,重点
private final AuthorizationServerTokenServices tokenServices;
//与clientDetails相关的service,重点
private final ClientDetailsService clientDetailsService;
//创建oauth2Request的工厂,重点
private final OAuth2RequestFactory requestFactory;

private final String grantType;
...

public OAuth2AccessToken grant(String grantType, TokenRequest tokenRequest) {

...
String clientId = tokenRequest.getClientId();
ClientDetails client = clientDetailsService.loadClientByClientId(clientId);
validateGrantType(grantType, client);

logger.debug("Getting access token for: " + clientId);

return getAccessToken(client, tokenRequest);

}

protected OAuth2AccessToken getAccessToken(ClientDetails client, TokenRequest tokenRequest) {
return tokenServices.createAccessToken(getOAuth2Authentication(client, tokenRequest));
}

protected OAuth2Authentication getOAuth2Authentication(ClientDetails client, TokenRequest tokenRequest) {
OAuth2Request storedOAuth2Request = requestFactory.createOAuth2Request(client, tokenRequest);
return new OAuth2Authentication(storedOAuth2Request, null);
}

...
}

回过头去看TokenEndpoint中,正是调用了这里的三个重要的类变量的相关方法。由于篇幅限制,不能延展太多,不然没完没了,所以重点分析下AuthorizationServerTokenServices是何方神圣。

AuthorizationServerTokenServices

public interface AuthorizationServerTokenServices {
//创建token
OAuth2AccessToken createAccessToken(OAuth2Authentication authentication) throws AuthenticationException;
//刷新token
OAuth2AccessToken refreshAccessToken(String refreshToken, TokenRequest tokenRequest)
throws AuthenticationException;
//获取token
OAuth2AccessToken getAccessToken(OAuth2Authentication authentication);

}

在默认的实现类DefaultTokenServices中,可以看到token是如何产生的,并且了解了框架对token进行哪些信息的关联。

@Transactional
public OAuth2AccessToken createAccessToken(OAuth2Authentication authentication) throws AuthenticationException {

OAuth2AccessToken existingAccessToken = tokenStore.getAccessToken(authentication);
OAuth2RefreshToken refreshToken = null;
if (existingAccessToken != null) {
if (existingAccessToken.isExpired()) {
if (existingAccessToken.getRefreshToken() != null) {
refreshToken = existingAccessToken.getRefreshToken();
// The token store could remove the refresh token when the
// access token is removed, but we want to
// be sure...
tokenStore.removeRefreshToken(refreshToken);
}
tokenStore.removeAccessToken(existingAccessToken);
}
else {
// Re-store the access token in case the authentication has changed
tokenStore.storeAccessToken(existingAccessToken, authentication);
return existingAccessToken;
}
}

// Only create a new refresh token if there wasn't an existing one
// associated with an expired access token.
// Clients might be holding existing refresh tokens, so we re-use it in
// the case that the old access token
// expired.
if (refreshToken == null) {
refreshToken = createRefreshToken(authentication);
}
// But the refresh token itself might need to be re-issued if it has
// expired.
else if (refreshToken instanceof ExpiringOAuth2RefreshToken) {
ExpiringOAuth2RefreshToken expiring = (ExpiringOAuth2RefreshToken) refreshToken;
if (System.currentTimeMillis() > expiring.getExpiration().getTime()) {
refreshToken = createRefreshToken(authentication);
}
}

OAuth2AccessToken accessToken = createAccessToken(authentication, refreshToken);
tokenStore.storeAccessToken(accessToken, authentication);
// In case it was modified
refreshToken = accessToken.getRefreshToken();
if (refreshToken != null) {
tokenStore.storeRefreshToken(refreshToken, authentication);
}
return accessToken;

}

简单总结一下AuthorizationServerTokenServices的作用,他提供了创建token,刷新token,获取token的实现。在创建token时,他会调用tokenStore对产生的token和相关信息存储到对应的实现类中,可以是Redis数据库,内存,jwt。

总结

本篇总结了使用客户端模式获取Token时,spring security oauth2内部的运作流程,其他模式有一定的不同,但抽象功能是固定的,只是具体的实现类会被响应地替换。阅读spring的源码,会发现它的设计中出现了非常多的抽象接口,这对我们理清楚内部工作流程产生了不小的困扰,我的方式是可以借助UML类图,先从宏观理清楚作者的设计思路,这会让我们的分析事半功倍。

下一篇文章重点分析用户携带token访问受限资源时,spring security oauth2内部的工作流程。

本系列文章

本文作者:徐靖峰,
原文链接:http://blog.csdn.net/u013815546/article/details/76977239
版权归作者所有,转载请注明作者、原文、译者等出处信息